Switch to Earphone UART SEC Switch to Micom UART ================================= onboot (Feb 25 2011 - 16:08:03) release ver : 1002 - RELEASE etc : ================================= Onboot X6 Sync mode LCD FastLogo Run... Loading Kernel.... load kernel start, size : 131072 + 3538944 byte Jump Kernel.... auth success by h/w sha1 UART1 is used to debug mode. [SELP] preset_lpj manual setting 894976 ================================================================================ SAMSUNG Mstar Kernel Version : 1003_192 RELEASE ================================================================================ init started: VDLinux-BusyBox v1.14.3-VD Linux VDLinux.1.2.1.x (2011-01-18 11:04:20 KST) starting pid 26, tty '': '/etc/rc.local' /etc/rc.local start!!!! ===================================================== ROOTFS VERSION : "Mstar-X6 1007" KERNEL MODULE VERSION : "1003_192 RELEASE" ===========##### send signal from USER, SIG : 0, init(1)->???(26) sys_kill ========================================== mount: mounting devpts on /dev/pts failed: No such device starting pid 37, tty '': '/bin/cttyhack -/bin/sh' /etc/profile start!! ==================================================================== [SELP] fsr module load!!(1003_192 RELEASE preempt mod_unload MIPS32_R2 32BIT ) ==================================================================== ==================================================================== [SELP] fsr_stl module load!!(1003_192 RELEASE preempt mod_unload MIPS32_R2 32BIT ) ==================================================================== ==================================================================== [SELP] rfs_glue module load!!(1003_192 RELEASE preempt mod_unload MIPS32_R2 32BIT ) ==================================================================== ==================================================================== [SELP] rfs_fat module load!!(1003_192 RELEASE preempt mod_unload MIPS32_R2 32BIT ) ==================================================================== "Mstar-X6 1007" KERNEL MODULE VERSION : "1003_192 RELEASE" + otp lock check OTP INFO : First Block OTP is Locked. OTP INFO : OTP Block is not Locked. mount mtd_rwarea mount mtd_exe mount mtd_rocommon mount mtd_rocommons Run FastLogo... ==================================================================== [SELP] FastLogo module load!!(1003_192 RELEASE preempt mod_unload MIPS32_R2 32BIT ) ==================================================================== ===================================== Update Images with Standalone!!! ===================================== USB start... mount mtd_rwcommon mount mtd_swu /etc/Scripts stand_alone_upgrade.sh start!!! cp: cannot stat '/mtd_swu/standalone/StandAlone.sh': Not a directory cp: cannot stat '/mtd_swu/standalone/StandAloneUpgrade': Not a directory cp: cannot stat '/mtd_swu/standalone/libSDAL_Wrapper.so': Not a directory cp: cannot stat '/mtd_swu/standalone/libTDsStandAlone.so': Not a directory cp: cannot stat '/mtd_swu/standalone/shadow_eu.ttf': Not a directory cp: cannot stat '/mtd_exe/StandAlone/shadow_jp.ttf': No such file or directory cp: cannot stat '/mtd_exe/StandAlone/shadow_ko.ttf': No such file or directory cp: cannot stat '/mtd_swu/standalone/shadow_s_cn.ttf': Not a directory cp: cannot stat '/mtd_swu/standalone/shadow_t_cn.ttf': Not a directory cp: cannot stat '/mtd_exe/StandAlone/shadow_us.ttf': No such file or directory ==================================================================== [SELP] usbcore module load!!(1003_192 RELEASE preempt mod_unload MIPS32_R2 32BIT ) ==================================================================== ==================================================================== [SELP] usb_storage module load!!(1003_192 RELEASE preempt mod_unload MIPS32_R2 32BIT ) ==================================================================== ==================================================================== [SELP] ehci_hcd module load!!(1003_192 RELEASE preempt mod_unload MIPS32_R2 32BIT ) ==================================================================== Copy lib files... cp: cannot stat '/mtd_swu/standalone/ld-2.8.so': Not a directory cp: cannot stat '/mtd_swu/standalone/libc-2.8.so': Not a directory cp: cannot stat '/mtd_swu/standalone/libdl-2.8.so': Not a directory cp: cannot stat '/mtd_swu/standalone/libgcc_s.so.1': Not a directory cp: cannot stat '/mtd_swu/standalone/libm-2.8.so': Not a directory cp: cannot stat '/mtd_swu/standalone/libnss_dns-2.8.so': Not a directory cp: cannot stat '/mtd_swu/standalone/libnss_files-2.8.so': Not a directory cp: cannot stat '/mtd_swu/standalone/libnss_nis.so.2': Not a directory cp: cannot stat '/mtd_swu/standalone/libnss_nisplus.so.2': Not a directory cp: cannot stat '/mtd_swu/standalone/libpthread-2.8.so': Not a directory cp: cannot stat '/mtd_swu/standalone/libresolv-2.8.so': Not a directory cp: cannot stat '/mtd_swu/standalone/librt-2.8.so': Not a directory cp: cannot stat '/mtd_swu/standalone/libstdc++.so.6.0.10': Not a directory Start link lib... ln: /mtd_swu/standalone/ld.so.1: Not a directory ln: /mtd_swu/standalone/libc.so.6: Not a directory ln: /mtd_swu/standalone/libdl.so.2: Not a directory ln: /mtd_swu/standalone/libgcc_s.so: Not a directory ln: /mtd_swu/standalone/libm.so.6: Not a directory ln: /mtd_swu/standalone/libnss_dns.so.2: Not a directory ln: /mtd_swu/standalone/libnss_files.so.2: Not a directory ln: /mtd_swu/standalone/libpthread.so.0: Not a directory ln: /mtd_swu/standalone/libresolv.so.2: Not a directory ln: /mtd_swu/standalone/librt.so.1: Not a directory ln: /mtd_swu/standalone/libstdc++.so: Not a directory ln: /mtd_swu/standalone/libstdc++.so.6: Not a directory End... Copy lib files... insmod: can't insert '/mtd_swu/standalone/samsung_mstar.ko': unknown symbol in module, or unknown parameter umount mtd_exe,mtd_rocommon /etc/Scripts/stand_alone_upgrade.sh: line 155: /mtd_swu/standalone/StandAlone.sh: not found /etc/Scripts/stand_alone_upgrade.sh: line 158: /mtd_swu/standalone/StandAlone.sh: not found /etc/Scripts stand_alone_upgrade.sh end!!! [CIP_KERNEL] ae80 is authuld length : file open success(rootfs) [CIP_KERNEL] >>> (/bin/authuld) file is successfully authenticated <<< [CIP_AUTHULD] ==================================================== [CIP_AUTHULD] Authuld Version : 1.5 : REL [CIP_AUTHULD] ==================================================== [CIP_KERNEL] Success!! Authuld is successfully completed. Switch to Earphone UART SEC Switch to Micom UART ================================= onboot (Feb 25 2011 - 16:08:03) release ver : 1002 - RELEASE etc : ================================= Onboot X6 Sync mode LCD FastLogo Run... Loading Kernel.... load kernel start, size : 131072 + 3538944 byte Jump Kernel.... auth success by h/w sha1 UART1 is used to debug mode. [SELP] preset_lpj manual setting 894976 ================================================================================ SAMSUNG Mstar Kernel Version : 1003_192 RELEASE ================================================================================ init started: VDLinux-BusyBox v1.14.3-VD Linux VDLinux.1.2.1.x (2011-01-18 11:04:20 KST) starting pid 26, tty '': '/etc/rc.local' /etc/rc.local start!!!! ===================================================== ROOTFS VERSION : "Mstar-X6 1007" KERNEL MODULE VERSION : "1003_192 RELEASE" ===========##### send signal from USER, SIG : 0, init(1)->???(26) sys_kill ========================================== mount: mounting devpts on /dev/pts failed: No such device starting pid 37, tty '': '/bin/cttyhack -/bin/sh' /etc/profile start!! ==================================================================== [SELP] fsr module load!!(1003_192 RELEASE preempt mod_unload MIPS32_R2 32BIT ) ==================================================================== ==================================================================== [SELP] fsr_stl module load!!(1003_192 RELEASE preempt mod_unload MIPS32_R2 32BIT ) ==================================================================== ==================================================================== [SELP] rfs_glue module load!!(1003_192 RELEASE preempt mod_unload MIPS32_R2 32BIT ) ==================================================================== ==================================================================== [SELP] rfs_fat module load!!(1003_192 RELEASE preempt mod_unload MIPS32_R2 32BIT ) ==================================================================== "Mstar-X6 1007" KERNEL MODULE VERSION : "1003_192 RELEASE" + otp lock check OTP INFO : First Block OTP is Locked. OTP INFO : OTP Block is not Locked. mount mtd_rwarea mount mtd_exe mount mtd_rocommon mount mtd_rocommons Run FastLogo... ==================================================================== [SELP] FastLogo module load!!(1003_192 RELEASE preempt mod_unload MIPS32_R2 32BIT ) ==================================================================== ===================================== Update Images with Standalone!!! ===================================== USB start... mount mtd_rwcommon mount mtd_swu /etc/Scripts stand_alone_upgrade.sh start!!! cp: cannot stat '/mtd_swu/standalone/StandAlone.sh': Not a directory cp: cannot stat '/mtd_swu/standalone/StandAloneUpgrade': Not a directory cp: cannot stat '/mtd_swu/standalone/libSDAL_Wrapper.so': Not a directory cp: cannot stat '/mtd_swu/standalone/libTDsStandAlone.so': Not a directory cp: cannot stat '/mtd_swu/standalone/shadow_eu.ttf': Not a directory cp: cannot stat '/mtd_exe/StandAlone/shadow_jp.ttf': No such file or directory cp: cannot stat '/mtd_exe/StandAlone/shadow_ko.ttf': No such file or directory cp: cannot stat '/mtd_swu/standalone/shadow_s_cn.ttf': Not a directory cp: cannot stat '/mtd_swu/standalone/shadow_t_cn.ttf': Not a directory cp: cannot stat '/mtd_exe/StandAlone/shadow_us.ttf': No such file or directory ==================================================================== [SELP] usbcore module load!!(1003_192 RELEASE preempt mod_unload MIPS32_R2 32BIT ) ==================================================================== ==================================================================== [SELP] usb_storage module load!!(1003_192 RELEASE preempt mod_unload MIPS32_R2 32BIT ) ==================================================================== ==================================================================== [SELP] ehci_hcd module load!!(1003_192 RELEASE preempt mod_unload MIPS32_R2 32BIT ) ==================================================================== Copy lib files... cp: cannot stat '/mtd_swu/standalone/ld-2.8.so': Not a directory cp: cannot stat '/mtd_swu/standalone/libc-2.8.so': Not a directory cp: cannot stat '/mtd_swu/standalone/libdl-2.8.so': Not a directory cp: cannot stat '/mtd_swu/standalone/libgcc_s.so.1': Not a directory cp: cannot stat '/mtd_swu/standalone/libm-2.8.so': Not a directory cp: cannot stat '/mtd_swu/standalone/libnss_dns-2.8.so': Not a directory cp: cannot stat '/mtd_swu/standalone/libnss_files-2.8.so': Not a directory cp: cannot stat '/mtd_swu/standalone/libnss_nis.so.2': Not a directory cp: cannot stat '/mtd_swu/standalone/libnss_nisplus.so.2': Not a directory cp: cannot stat '/mtd_swu/standalone/libpthread-2.8.so': Not a directory cp: cannot stat '/mtd_swu/standalone/libresolv-2.8.so': Not a directory cp: cannot stat '/mtd_swu/standalone/librt-2.8.so': Not a directory cp: cannot stat '/mtd_swu/standalone/libstdc++.so.6.0.10': Not a directory Start link lib... ln: /mtd_swu/standalone/ld.so.1: Not a directory ln: /mtd_swu/standalone/libc.so.6: Not a directory ln: /mtd_swu/standalone/libdl.so.2: Not a directory ln: /mtd_swu/standalone/libgcc_s.so: Not a directory ln: /mtd_swu/standalone/libm.so.6: Not a directory ln: /mtd_swu/standalone/libnss_dns.so.2: Not a directory ln: /mtd_swu/standalone/libnss_files.so.2: Not a directory ln: /mtd_swu/standalone/libpthread.so.0: Not a directory ln: /mtd_swu/standalone/libresolv.so.2: Not a directory ln: /mtd_swu/standalone/librt.so.1: Not a directory ln: /mtd_swu/standalone/libstdc++.so: Not a directory ln: /mtd_swu/standalone/libstdc++.so.6: Not a directory End... Copy lib files... insmod: can't insert '/mtd_swu/standalone/samsung_mstar.ko': unknown symbol in module, or unknown parameter umount mtd_exe,mtd_rocommon /etc/Scripts/stand_alone_upgrade.sh: line 155: /mtd_swu/standalone/StandAlone.sh: not found /etc/Scripts/stand_alone_upgrade.sh: line 158: /mtd_swu/standalone/StandAlone.sh: not found /etc/Scripts stand_alone_upgrade.sh end!!! [CIP_KERNEL] ae80 is authuld length : file open success(rootfs) [CIP_KERNEL] >>> (/bin/authuld) file is successfully authenticated <<< [CIP_AUTHULD] ==================================================== [CIP_AUTHULD] Authuld Version : 1.5 : REL [CIP_AUTHULD] ==================================================== [CIP_KERNEL] Success!! Authuld is successfully completed. Switch to Earphone UART SEC Switch to Micom UART ================================= onboot (Feb 25 2011 - 16:08:03) release ver : 1002 - RELEASE etc : ================================= Onboot X6 Sync mode LCD FastLogo Run... Loading Kernel.... load kernel start, size : 131072 + 3538944 byte Jump Kernel.... auth success by h/w sha1 UART1 is used to debug mode. [SELP] preset_lpj manual setting 894976 ================================================================================ SAMSUNG Mstar Kernel Version : 1003_192 RELEASE ================================================================================ init started: VDLinux-BusyBox v1.14.3-VD Linux VDLinux.1.2.1.x (2011-01-18 11:04:20 KST) starting pid 26, tty '': '/etc/rc.local' /etc/rc.local start!!!! ===================================================== ROOTFS VERSION : "Mstar-X6 1007" KERNEL MODULE VERSION : "1003_192 RELEASE" ===========##### send signal from USER, SIG : 0, init(1)->???(26) sys_kill ========================================== mount: mounting devpts on /dev/pts failed: No such device starting pid 37, tty '': '/bin/cttyhack -/bin/sh' /etc/profile start!! ==================================================================== [SELP] fsr module load!!(1003_192 RELEASE preempt mod_unload MIPS32_R2 32BIT ) ==================================================================== ==================================================================== [SELP] fsr_stl module load!!(1003_192 RELEASE preempt mod_unload MIPS32_R2 32BIT ) ==================================================================== ==================================================================== [SELP] rfs_glue module load!!(1003_192 RELEASE preempt mod_unload MIPS32_R2 32BIT ) ==================================================================== ==================================================================== [SELP] rfs_fat module load!!(1003_192 RELEASE preempt mod_unload MIPS32_R2 32BIT ) ==================================================================== "Mstar-X6 1007" KERNEL MODULE VERSION : "1003_192 RELEASE" + otp lock check OTP INFO : First Block OTP is Locked. OTP INFO : OTP Block is not Locked. mount mtd_rwarea mount mtd_exe mount mtd_rocommon mount mtd_rocommons == Start exeDSP == /mtd_exe/rc.local start !!!!! ==================================================================== [SELP] samsung_mstar module load!!(1003_192 RELEASE preempt mod_unload MIPS32_R2 32BIT ) ==================================================================== Run FastLogo... ==================================================================== [SELP] FastLogo module load!!(1003_192 RELEASE preempt mod_unload MIPS32_R2 32BIT ) ==================================================================== mallopt(M_MMAP_THRESHOLD) success! [FASTBOOT] Main thread id: 54 ##### System Execution!!! ##### [1990] Running Parallel FASTBOOT MMAP: E_MMAP_256MB_256MB startaddr = 4630000, alignment = 0, size= 4e0000 startaddr = 7890000, alignment = 0, size= 4000 startaddr = 78b4000, alignment = 0, size= 7800000 startaddr = f0b4000, alignment = 0, size= 10000 startaddr = f0c4000, alignment = 0, size= 6a8000 startaddr = f76d400, alignment = 400, size= 760e20 startaddr = 5310000, alignment = 0, size= 380000 startaddr = 20000000, alignment = 0, size= 2800000 startaddr = 22800000, alignment = 0, size= 1400000 startaddr = 23c00000, alignment _mod_sys_open.236 ioctl = 0, size= 200000 --------------------------------------------- SdCommon_GpioInit() --------------------------------------------- DRAM SIZE 512M SDAL - 05.44.00.00 Init PWM2 Init PWM4 GOP FB:22800000 GOP2 FB:78b4000 the length of the thread name exceeds 15, it will be truncated to_mod_sys_open.236 ioctl 15 chars ------------------[SdCommon_IicInit][969] [HAL_DSCMB_SetBank][82] Set bank 0x2b13e000 u32PhyBufAddr = 04640100, u32PhyBufSize = 000cff00 u32VirBufAddr = 2b1ce100, u32VirBufSize = 000cff00 NonPmBase = 0x2b13e000, NonPmBankSize = 0x80000 PmBase = 0x2aebe000,_mod_sys_open.236 ioctl PmBankSize =_mod_sys_release.243 ioctl 0x280000 CODE_ADDR_NCACHE = 0x2b1be000, CODE_ADDR = 0x4630000 pm_aes_fw: Thrd(720098512) SEND OUT: ac00 Thrd(720098512) RESPONSE: 7468 pTest: 00 00 64 04 SDAL version : SDAL - 05.44.00.00 >>> TDBuilder::Build start [SdMisc_DisplayResolution 593] ------------------[SdCommon_IicInit][969] [LightSensorMonitor::LightSensorMonitor] m_poLightSensor = [0x06ff1d18] [LightSensorMonitor::LightSensorMonitor] m_poLightSensor = [0x06ff2790] <<< TDBuilder::Build End MApi_PVR_Init_AESDMA MApi_PVR_Init_AESDMA ResetSystemConfig tuner ############## Find Factory_Part1.dat File in mtd_exe ################## ############## Find Factory_Part2.dat File in mtd_exe ################## FixedId : Nvram[41] vs File[41] WBId : Nvram[600] vs File[600] WB ADC(Part1) Id : Nvram[40] vs File[40] EER Basic Id : Nvram[52] vs File[52] EERId Custom : Nvram[664] vs File[664] FACId : Nvram[49] vs File[49] [FastBoot][Error] Missmatch Tuner type[Int] & Auto Store Type[Never] LightSensorMonitor Creat...Start Brightness Step = [20] [LightSensorMonitor] Start ! ID_SELECT_LCD PDP:LCD,GPIO_LCD_PDP SEL:LCD Called...withDB =========1 Tuner Selected !!! TUNER Init address:2b13e000 80000 address:2aebe000 280000 >Load Code... OGA T9 DVB-T Load DSP Code OK @@Enter DVB-T DEMOD_ENTRY @@Exit DVB-T DEMOD_ENTRY MApi_DMX_GetLibVer 00318138 >>[ERR:TDsNTP7411AudioAmp.cpp] t_WriteReg():1276 -c- Addr = 0x02, Data = 0x01 Write fails -?- Check Factory, Num of Amp is 1. DSPBinBaseAddress = 0x0 DSPMadBaseBufferAdr = 0xf16c000 HAL_AUDIO_SetPowerOn(1) ======> Audio R2 Base : f16c000 Data Transferred to Store...[384]!!! Data Transferred to ScreenObject...[384]!!! [PVRSSFactory::Build(),LINE:82 ] MDrv_WBLE_EnableBLE(): invoking Hal_WBLE_set_ble() Checking PQ bin in /mtd_rwarea/... /mtd_rwarea/X6_Main.bin is not exist!! Checking PQ bin in /mtd_exe/pqbin/... /mtd_exe/pqbin/X6_Main.bin is not exist!! Checking PQ bin in /mnt/pqbin/... /mnt/pqbin/X6_Main.bin is not exist!! !!!!!PQ bin is not exist, use C files!!!!! ======================================= [PQ File] version info: X6_Main_0000000000000216 ver X6_Sub_0000000000000018 ver X6_Main_Ex_0000000000000012 ver X6_Sub_Ex_0000000000000003 ver ======================================= ~~[Sub System Error] CloneUSB.cpp:t_RestoreNvramFromFile():379 /mtd_rwarea/PLDAT_Clone File open error ! ~~[Sub System Error] CloneUSB.cpp:t_RestoreNvramFromFile():379 /mtd_rwarea/SSDAT_Clone File open error ! ~~[Sub System Error] CloneUSB.cpp:t_RestoreFactoryFromFile():549 /mtd_rwarea/FADAT_Clone File open error ! Crop win invalid!! Disp win invalid!! MApi_XC_SetWindow failed because of InitData wrong, please update header file and compile again [TDaSystem::PrimePivotModeConfig] PivotConfig Size [1920 * 1080], Mode [3] DSP code loaded successfully ~~[Sub System Error] CloneUSB.cpp:t_SafeFileRename():603 File /mtd_rwarea/PLDAT_Clone do not exist!! ~~[Sub System Error] CloneUSB.cpp:t_SafeFileRename():603 File /mtd_rwarea/SSDAT_Clone do not exist!! ~~[Sub System Error] CloneUSB.cpp:t_SafeFileRename():603 File /mtd_rwarea/FastLogoInfo_Clone do not exist!! ~~[Sub System Error] CloneUSB.cpp:t_SafeFileRename():603 File /mtd_rwarea/FADAT_Clone do not exist!! [TDaScaler][Create]CREATE_TYPE_STEP_FHD !!! [TDaScaler][Create]CREATE_TYPE_STEP_SD !!! >>[ERR:RectangleHelper.cpp] Create():2033 [eResolution Create Type=0] >>[ERR:TDcGraphicScaler.cpp] t_GraphicGet():1221 [G-Main]Read fail Drv Data [TDaScaler][Create]CREATE_TYPE_STEP_FHD !!! [TDaScaler][Create]CREATE_TYPE_STEP_SD !!! >>[ERR:RectangleHelper.cpp] Create():2033 [eResolution Create Type=0] [TDaScaler][Create]CREATE_TYPE_STEP_FHD !!! [TDaScaler][Create]CREATE_TYPE_STEP_SD !!! >>[ERR:RectangleHelper.cpp] Create():2033 [eResolution Create Type=0] [TDaScaler][Create]CREATE_TYPE_STEP_FHD !!! [TDaScaler][Create]CREATE_TYPE_STEP_SD !!! >>[ERR:RectangleHelper.cpp] Create():2033 [eResolution Create Type=0] Param_u16Fmodulation = 4 DDR_u16Deviation = 10 === kochien SRS_SetTSHD === === invalid auto volume mode === the length of the thread name exceeds 15, it will be truncated to 15 chars [ Fast Boot ] [ Panel Control Type : 3 ] >>[ERR:TDiVideoEnhancer.cpp] SetPictureInformation():177 Null Fuction Call !!!Must Check Implementation Code... ~~[Sub System Error] AutoClockMonitor.cpp:Create():62 Read Time is Invalid Data...So Initialize Time...[2000/00/00 00:00:00] SdMisc_HShaking: 0 ====== Send Jack ID Command to SubMicom ! ===== SetKeySensitivity = 36n set prescale DSP type error!! ff set prescale DSP type error!! ff set prescale DSP type error!! ff Get Boot Status ACK! status : 0[0x0] set prescale DSP type error!! ff Get MasterPowerR_mod_sys_open.236 ioctl eset ACK! status : 1[0x0] PCMCIA open /dev/system success >> SYS_fd= 14 Has Chmap [ Fast Boot ] [ Panel Control Type : 2 ] ================================================== ---------- GLOBAL INITIALIZATION START [3800]---- ================================================== [SdCI_Set][BYPASS][1] [SS][EventSender::InstallFreezeCallback(),LINE:111 ] SdVideo_Get()#1385: g_IPanel.Wid==================================================================== th(), g_IPanel.Height(): (1920, 1080) Initial Value ,No Input Source Initial Value ,No Input Source Initial Value ,No Input Source >>> [SELP] FastLogo module unload!!(1003_192 RELEASE preempt mod_unload MIPS32_R2 32BIT ) t_PlayMelody 0 ================================================== ----------------- FAST BOOT START [3860]---------- ========================================================================================== ============================ ==== HDMI [SRC num :1], [ID: 0x47], [HP STATE: 0xf] [PrimeShare] t_SetSPDIF_PCM_Level : eSrc 0, DDCompMode 1 (RFmode:1), Factory value 1, SDAL set value 0 |||||||||||||||||| PWM Enable ..!!! |||||||||||||||||| |||||||||||||||||| Inverter On ..!!! |||||||||||||||||| >>[ERR:TDiVideoEnhancer.cpp] SetPictureInformation():177 Null Fuction Call !!!Must Check Implementation Code... [ Fast Boot ] [ Panel Control Type : 4 ] === SdMisc_SetTheaterSndHD ok === === kochien SRS_SetTSHD === === invalid auto volume mode === Out of range. Set to fFrequency = 42000 @@Enter DVB-T DEMOD_ENTRY @@Exit DVB-T DEMOD_ENTRY >>[ERR:TDiDemux.cpp] SetInputType():208 Null Fuction Call !!!Must Check Implementation Code... eAudDecId(0), eStreamType(0), AudType(0) [TV mode] eAudFormat (0) Source : 513 Video ID : 0 >>[ERR:TDsPrimeMpeg.cpp] t_InstallCBForPVR():2642 - SDAL ERROR [-2] !!! >>[ERR:TDsPrimeMpeg.cpp] t_InstallCBForPVR():2642 - SDAL ERROR [-2] !!! >>[ERR:TDsPrimeMpeg.cpp] t_InstallCBForPVR():2642 - SDAL ERROR [-2] !!! eAudDecId(0), eStreamType(0), AudType(0) [TV mode] eAudFormat (0) >>[ERR:TDsPrimeScaler.cpp] SetMonitorOut():1932 It failed in setting a scaler Aux out mute!!! (Off) [4:691180][DEBUG][CUniPlayerMediator][18] [4:691388][DEBUG][InstallResolutionCallback][648] [4:691434][DEBUG][InstallResolutionCallbackForClip][657] [Scaler] TDResolution_k : [21] TDResolutionInfo_t [720], [576], [0], [0], [864], [625], [0], [50000], [1], [0], [0], [0], [0], [0], [0], [0], [513], [1], [0], [17], [0], [0] others ## Core Software Platform (TM) 1.1 : DTP-SP-0085 (RELEASE) Copyright (C) SAMSUNG Electronics Co.,Ltd. CSP No sched_yield() TCMW::Initialize() start >>[ERR:TDiDemux.cpp] SetInputType():208 Null Fuction Call !!!Must Check Implementation Code... HAL_MVD_LoadCode : From 0x2c4f8bf0 to 0x395c0000, size = 152448 [PVRSSFactory::getPVRSSRecorder(),LINE:199 ] " DriverType = [0] " [PVRSSFactory::getPVRSSRecorder(),LINE:200 ] " RecorderNumber = [0] , MaxRecorderNumber = [2] " [PVRSSFactory::getPVRSSRecorder(),LINE:214 ] " System RecorderDriver is Created" [PVRSSFactory::getPVRSSRecorder(),LINE:228 ] " PVRSSFactory will create m_recorder[0]" [SS] [ERR][RecordMonitor.cpp:stopRecordReadyAlram():173] readyAlarm is not created. [SS][ #-1 ][CRecordController::changeState(),LINE:371 ] " State Change : [NULL] ---> [RecorderNoneState] " [SS] [ERR][RecordMonitor.cpp:stopRecordReadyAlram():173] readyAlarm is not created. [PVRSSFactory::getPVRSSRecorder(),LINE:232 ] " PVRSSFactory will return m_recorder[0]" [PVRSSFactory::getPVRSSPlayer(),LINE:247 ] " DriverType = [0] " [PVRSSFactory::getPVRSSPlayer(),LINE:248 ] " PlayerNumber = [0], MaxPlayerNumber=[1] " [PVRSSFactory::getPVRSSPlayer(),LINE:261 ] " System PlayerDriver is Created " CTrickPlayerManager::GetTrickPlayerManager() m_pTrickPlayerManager == NULL) CTrickPlayerManager::GetTrickPlayerManager() GetTrickPlayer[0] == NULL) [PVRSSFactory::getPVRSSPlayer(),LINE:274 ] " PVRSSFactory will create m_player[0]" [SS] [PLY] [ PVRSSPlayer.cpp::CPVRSSPlayer(), LINE:42 ] [PVRSSFactory::getPVRSSPlayer(),LINE:277 ] " PVRSSFactory will return m_player[0]" ProfileManager::t_CompareMagicKey() line[567] Offset 0 Size 4] ProfileManager::t_CompareMagicKey() line[575] CRC: 82251018, magicKey: 82251018ProfileManager::Init() line[75] Mark 953 IRQ 11 polling thread destroyed IRQ 11 polling fd closed!! HAL_MVD_LoadCode : From 0x2c4f8bf0 to 0x395c0000, size = 152448 [SdCI_Set][BYPASS][1] Profile AgentID Offset Size [DEFAULT/Info] 0 : 43 17 0 2c [DEFAULT/Info] 1 : Data: [DEFAULT/Info] 2 : 0 0 0 0 0 0 4c 3 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [DEFAULT/Info] 3 : ff ff ff ff ff ff ff ff 0 df c 7 [DEFAULT/Info] 4 : ----------------------------------------------------------------- [DEFAULT/Info] 5 : 43 19 2c c [DEFAULT/Info] 6 : Data: [DEFAULT/Info] 7 : 0 0 0 0 ff ff ff ff 1 0 0 0 [DEFAULT/Info] 8 : ----------------------------------------------------------------- [DEFAULT/Info] 9 : 43 21 38 10 [DEFAULT/Info] 10 : Data: [DEFAULT/Info] 11 : ff ff ff ff ff ff ff ff ff ff c 7 ff ff ff ff [DEFAULT/Info] 12 : ----------------------------------------------------------------- [DEFAULT/Info] 13 : 43 23 48 24 [DEFAULT/Info] 14 : Data: [DEFAULT/Info] 15 : 0 0 0 0 0 0 0 0 0 0 0 0 12 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 [DEFAULT/Info] 16 : 0 0 0 0 [DEFAULT/Info] 17 : ----------------------------------------------------------------- [DEFAULT/Info] 18 : 43 26 6c 18 [DEFAULT/Info] 19 : Data: [DEFAULT/Info] 20 : ff ff ff ff 0 0 0 0 ff ff ff ff 0 0 0 0 ff ff ff ff 0 0 0 0 [DEFAULT/Info] 21 : ----------------------------------------------------------------- [DEFAULT/Info] 22 : ####Reset TCTvManagerBase::Create#### [DEFAULT/Info] 23 : ####Reset Channel Magic Key ! old = 1101004 new = 1101004 !!!#### [DEFAULT/Debugging] 24 : FlagHospitalMode[0] [M_TMS/Fatal] 25 : TCNameMemory::Load() => Couldn't create file /mtd_chmap/DefaultAuthority [M_TMS/Fatal] 26 : TCBouquetMemory::Load() => Couldn't create file /mtd_chmap/Bouquets [DEFAULT/Debugging] 27 : TCChSortModeDB::LoadSortMode Cannot Open File /mtd_chmap/ChSortMode [DEFAULT/Debugging] 28 : FlagUseHotelMixedMap, factoryMapUse[0] [DEFAULT/Debugging] 29 : FlagUseHotelMixedMap, hotelProductType[0] >>[ERR:TDsPrimeAudioProcessor.cpp] Connect():1092 !!!Melody not done : eSrc = [0x201] or eWindowType = [0x0] === SdMisc_SetTheaterSndHD ok === [InstallAudioMuteCallback][894] [DEFAULT/Fatal] 30 : TCWindowInfoManager_DVB::t_ChangeCountry (WindowId:1 TvMode:0 Country:13,BroadCasterId :-1) [DEFAULT/Fatal] 31 : TCWindowInfoManager_DVB::t_ChangeCountry (WindowId:6 TvMode:0 Country:13,BroadCasterId :-1) [DEFAULT/Fatal] 32 : TCWindowInfoManager_DVB::t_ChangeCountry (WindowId:7 TvMode:0 Country:13,BroadCasterId :-1) [DEFAULT/Fatal] 33 : TCWindowInfoManager_DVB::t_ChangeCountry (WindowId:2 TvMode:0 Country:13,BroadCasterId :-1) [DEFAULT/Fatal] 34 : TCWindowInfoManager_DVB::t_ChangeCountry (WindowId:4 TvMode:0 Country:13,BroadCasterId :-1) [DEFAULT/Fatal] 35 : TCWindowInfoManager_DVB::t_ChangeCountry (WindowId:9 TvMode:0 Country:13,BroadCasterId :-1) [DEFAULT/Debugging] 36 : LSC Resource enabled! Network support : 2 (1 : Cable, 2 : WiFi Ext., 3: WiFi Int. [SdCI_Set][BYPASS][1] [DEFAULT/Debugging] 37 : [TCIMSUtil::AddInfoManager] Failed to add InfoManager to list. [DEFAULT/Fatal] 38 : [t_FillChannelInfo] FoundChannel - retVal:1 37(1-65534),2 [DEFAULT/Fatal] 39 : [t_InitChannel] CurrentChannel - 37(1-65534),2 [DEFAULT/Fatal] 40 : [t_FillChannelInfo] FoundChannel - retVal:1 37(1-65534),2 [DEFAULT/Fatal] 41 : [m_UpdateBootChannel] SetChannel - 37(1-65534),2 [M_DSM_OC/Fatal] 42 : [TCObjManagerBase::Create] Country = 13 [M_DSM_OC/Fatal] 43 : [TCObjManagerBase::Create] PROFILE MHEG TCMW::Initialize() end Shadow 2.5 (revision number: DTP-BP-Shadow-0214-Mstar-X6-DEU-08-Release) is being initialized.Tune Done... [0] Check Resolution.... Time 0, RESOLUTION_NOSIGNAL [PLF][Platform:97] -- before create ==================== First GOP driver instance, flush GWIN HW ==================== Check Resolution.... Time 50, RESOLUTION_NOSIGNAL [X6_Screen32.cpp:X6_Screen32:70] SCREEN0 width : 1280, height : 720, address: 31664040 [X6_Screen32.cpp:X6_Screen32:70] SCREEN1 width : 1920, height : 1080, address: 3c5ab040 Check Resolution.... Time 100, RESOLUTION_NOSIGNAL [X6_Screen32.cpp:X6_Screen32:70] SCREEN2 width : 960, height : 540, address: 3cf8e480 [X6_Screen32.cpp:Enable:419] SCREEN0 [SdGfx_Mute:1176-TID(54)] screen(0) On(1)/Off(0) : 1 [X6_Screen32.cpp:Disable:429] SCREEN1 [SdGfx_Mute:1176-TID(54)] screen(1) On(1)/Off(0) : 0 [X6_Screen32.cpp:Disable:429] SCREEN2 [SdGfx_Mute:1176-TID(54)] screen(2) On(1)/Off(0) : 0 [PLF][Platform:129] -- after create [PLF][IsEnabled:148] SCREEN0 (true) [PLF][IsEnabled:148] SCREEN1 (false) [PLF][IsEnabled:148] SCREEN2 (false) Check Resolution.... Time 150, RESOLUTION_NOSIGNAL Check Resolution.... Time 200, RESOLUTION_NOSIGNAL 0 (4294967295): Initialize Cubic Motion Profile v2.5.0214-05 [DTVInputService::t_Create] m_nKeyInputTime = 6360 Check Resolution.... Time 260, RESOLUTION_NOSIGNAL [DEFAULT/Warning] 44 : Specified confliction type has already been set !! [DEFAULT/Warning] 45 : Specified confliction type has already been set !! [DEFAULT/Warning] 46 : Specified confliction type has already been set !! [DEFAULT/Warning] 47 : Specified confliction type has already been set !! [DEFAULT/Warning] 48 : Specified confliction type has already been set !! [DEFAULT/Warning] 49 : Specified confliction type has already been set !! [DEFAULT/Warning] 50 : Specified confliction type has already been set !! Check Resolution.... Time 310, RESOLUTION_NOSIGNAL Check Resolution.... Time 360, RESOLUTION_NOSIGNAL Check Resolution.... Time 410, RESOLUTION_NOSIGNAL Check Resolution.... Time 460, RESOLUTION_NOSIGNAL Check Resolution.... Time 520, RESOLUTION_NOSIGNAL Check Resolution.... Time 570, RESOLUTION_NOSIGNAL Check Resolution.... Time 620, RESOLUTION_NOSIGNAL Check Resolution.... Time 670, RESOLUTION_NOSIGNAL Check Resolution.... Time 720, RESOLUTION_NOSIGNAL Check Resolution.... Time 780, RESOLUTION_NOSIGNAL Temp log : CPreAllocatedMemoryAllocator::initialize, m_pBuffer = 0X47F87008 Check Resolution.... Time 830, RESOLUTION_NOSIGNAL Check Resolution.... Time 880, RESOLUTION_NOSIGNAL Check Resolution.... Time 930, RESOLUTION_NOSIGNAL Check Resolution.... Time 980, RESOLUTION_NOSIGNAL Check Resolution.... Time 1040, RESOLUTION_NOSIGNAL APP_INITIALIZE(); end [DEFAULT/Debugging] 51 : MW Initilize Completed ================================================== ----------- GLOBAL INITIALIZATION END [7200]------ ================================================== Check Resolution.... Time 1090, RESOLUTION_NOSIGNAL Check Resolution.... Time 1140, RESOLUTION_NOSIGNAL Check Resolution.... Time 1190, RESOLUTION_NOSIGNAL Check Resolution.... Time 1240, RESOLUTION_NOSIGNAL Check Resolution.... Time 1300, RESOLUTION_NOTSUPPORT Check Resolution.... Time 1350, RESOLUTION_NOTSUPPORT Check Resolution.... Time 1400, RESOLUTION_NOTSUPPORT Check Resolution.... Time 1450, RESOLUTION_NOTSUPPORT Check Resolution.... Time 1500, RESOLUTION_NOTSUPPORT Check Resolution.... Time 1560, RESOLUTION_NOTSUPPORT Check Resolution.... Time 1610, RESOLUTION_NOTSUPPORT Check Resolution.... Time 1660, RESOLUTION_NOTSUPPORT Check Resolution.... Time 1710, RESOLUTION_NOTSUPPORT Check Resolution.... Time 1760, RESOLUTION_NOTSUPPORT Check Resolution.... Time 1820, RESOLUTION_NOTSUPPORT Check Resolution.... Time 1870, RESOLUTION_NOTSUPPORT Check Resolution.... Time 1920, RESOLUTION_NOTSUPPORT Check Resolution.... Time 1970, RESOLUTION_NOTSUPPORT Check Resolution.... Time 2020, RESOLUTION_NOTSUPPORT Check Resolution.... Time 2080, RESOLUTION_NOTSUPPORT Check Resolution.... Time 2130, RESOLUTION_NOTSUPPORT Check Resolution.... Time 2180, RESOLUTION_NOTSUPPORT Check Resolution.... Time 2230, RESOLUTION_NOTSUPPORT Check Resolution.... Time 2280, RESOLUTION_NOTSUPPORT Check Resolution.... Time 2340, RESOLUTION_NOTSUPPORT Check Resolution.... Time 2390, RESOLUTION_NOTSUPPORT Check Resolution.... Time 2440, RESOLUTION_NOTSUPPORT Check Resolution.... Time 2490, RESOLUTION_NOTSUPPORT Check Resolution.... Time 2540, RESOLUTION_NOTSUPPORT Check Resolution.... Time 2600, RESOLUTION_NOTSUPPORT Check Resolution.... Time 2650, RESOLUTION_NOTSUPPORT Check Resolution.... Time 2700, RESOLUTION_NOTSUPPORT Check Resolution.... Time 2750, RESOLUTION_NOTSUPPORT Check Resolution.... Time 2800, RESOLUTION_NOTSUPPORT Check Resolution.... Time 2860, RESOLUTION_NOTSUPPORT Check Resolution.... Time 2910, RESOLUTION_NOTSUPPORT Check Resolution.... Time 2960, RESOLUTION_NOTSUPPORT Check Resolution.... Time 3010, RESOLUTION_NOTSUPPORT [9:192294][DEBUG][UninstallResolutionCallback][794] [9:192438][DEBUG][UninstallResolutionCallbackForClip][802] [9:192534][DEBUG][UninstallAudioMuteCallback][904] >>[ERR:TDsPrimeDemux.cpp] SetAudioDescriptionId():957 Invalid Audio Descriptio PID... eAudDecId(1), eStreamType(0), AudType(0) IRQ 11 polling thread destroyed IRQ 11 polling fd closed!! eAudDecId(0), eStreamType(0), AudType(0) [TV mode] eAudFormat (0) >>[ERR:TDsPrimeMpeg.cpp] t_UnInstallCBForPVR():2654 - SDAL ERROR [-2] !!! >>[ERR:TDsPrimeMpeg.cpp] t_UnInstallCBForPVR():2654 - SDAL ERROR [-2] !!! >>[ERR:TDsPrimeMpeg.cpp] t_UnInstallCBForPVR():2654 - SDAL ERROR [-2] !!! [pthd_t_InitCrumbs] START >>> t_ExeFastBoot 1 =============== FAST BOOT Exception [9350]========= end of Melody for on [pthd_t_InitCrumbs] NvRam Caching [pthd_t_InitCrumbs] END === SdMisc_SetTheaterSndHD ok === >>[ERR:TDsPrimeAudioProcessor.cpp] Connect():1084 !!!error : eSrc = [0x0] or eWindowType = [0x0] ================================================== ------------------ FAST BOOT END [9390]------------ ================================================== Product version : T-MST5DEUC-1021.1 [DEFAULT/Debugging] 52 : WaitForFastBoot End [DEFAULT/Debugging] 53 : TCBootingChannelInfo::Set is called...[BootReason : -1][RealBootReason : -1] [AP_INFOLINK/Fatal] 54 : CNNaviAppBase::t_Create() TPCTv::Power, ######## 3 ######## Param : 0 ================================================== ------------------- NORMAL MODE ------------------ ================================================== ================================================== --------------- NORMAL MODE COMPLETE-------------- ================================================== System proccess >>>>> [ SYSTEM_READY ] TPCTv::Power, Return Value Check : 1 ## [EnableScreen] Screen(0), Caller(2) [PLF][IsEnabled:148] SCREEN0 (true) ## [EnableScreen] Screen(1), Caller(2) [PLF][IsEnabled:148] SCREEN1 (false) [X6_Screen32.cpp:Enable:419] SCREEN1 [SdGfx_Mute:1176-TID(149)] screen(1) On(1)/Off(0) : 1 [PLF][Enable:189] SCREEN1 OK [DEFAULT/Debugging] 55 : [t_OnSystemReady:6697] First, Display Channel Banner Start(9470) === SdMisc_SetTheaterSndHD ok === [DEFAULT/Debugging] 56 : [t_OnSystemReady:6708] First, Display Channel Banner End(9650) network_init start in /etc/Scripts/rest_mount.sh !! ==================================================================== [SELP] mdrv_emac module load!!(1003_192 RELEASE preempt mod_unload MIPS32_R2 32BIT ) ==================================================================== mount mtd_swu mount mtd_contents mount mtd_rwcommon [AP_INFOLINK/Fatal] 57 : CNNaviLoadingBase::Create() [AP_INFOLINK/Fatal] 58 : Create Loading OSD for TV or Monitor [AP_INFOLINK/Fatal] 59 : END CNNaviLoadingBase::Create() [AP_INFOLINK/Fatal] 60 : CNNaviMsg::Create() [CIP_KERNEL] ae80 is authuld length : file open success(rootfs) [CIP_KERNEL] >>> (/bin/authuld) file is successfully authenticated <<< [CIP_AUTHULD] ==================================================== [CIP_AUTHULD] Authuld Version : 1.5 : REL [CIP_AUTHULD] ==================================================== mount mtd_rwdata [A_APPMW/Fatal] 61 : [CAppUtil::CheckResetAfterPnpOTN] [A_APPMW/Fatal] 62 : [CAppUtil::CheckResetAfterPnpOTN] PnPcheck File doesn't exist [PrimeShare] t_GetAudioOutPutGain : cRegionIndex = 1, cAudioFormatIndex = 4, InputGain = 0 OutputGain = 0 [PrimeShare] t_SetAudioOutPutGain : eSoundId = 0, Input Gain = 0, Output Gain = 0 [PrimeShare] t_SetSPDIF_PCM_Level : eSrc 0, DDCompMode 1 (RFmode:1), Factory value 1, SDAL set value 0 ==================== DCDsmManager pid = 54 [SS][EventSender::InstallEventCallback(),LINE:43 ] @@Enter DVB-T DEMOD_ENTRY [A_MHEG_PORTING_LAYER/Fatal] 63 : CHTTPDispatcher: created m_pHttpIf [A_MHEG_PORTING_LAYER/Fatal] 64 : CHTTPDispatcher: created m_pHttps ## [ChangeRes] Screen(1), Caller(25), Width = 720, Height = 576 [X6_Screen32.cpp:Resize:370] SCREEN1 (1920 x 1080) -> (720 x 576) [SdGfx_Set:598-TID(204)] screenNum(1) @@Exit DVB-T DEMOD_ENTRY >>[ERR:TDiDemux.cpp] SetInputType():208 Null Fuction Call !!!Must Check Implementation Code... eAudDecId(0), eStreamType(0), AudType(0) [TV mode] eAudFormat (0) Source : 513 Video ID : 0 >>[ERR:TDsPrimeMpeg.cpp] t_InstallCBForPVR():2642 - SDAL ERROR [-2] !!! >>[ERR:TDsPrimeMpeg.cpp] t_InstallCBForPVR():2642 - SDAL ERROR [-2] !!! >>[ERR:TDsPrimeMpeg.cpp] t_InstallCBForPVR():2642 - SDAL ERROR [-2] !!! [TPAWindow.cpp][ConnectSource][WID:0][CALL].. >>[ERR:TDsPrimeScaler.cpp] SetMonitorOut():1932 It failed in setting a scaler Aux out mute!!! (Off) [10:984640][DEBUG][InstallResolutionCallback][648] [10:984737][DEBUG][InstallResolutionCallbackForClip][657] [Scaler] TDResolution_k : [21] TDResolutionInfo_t [720], [576], [0], [0], [864], [625], [0], [50000], [1], [0], [0], [0], [0], [0], [0], [0], [513], [1], [0], [17], [0], [0] >>[X4Share] t_GetExtInSourceToPort: Error Source To Port Set Control Error eSource = 0x201, Port = 6 !!!!!!!!!!!!!!!!!!!!! Source : 513 Window Type : 0 Back End Decoder Type : 7, tdRet=0 [PrimeShare] t_GetAudioOutPutGain : cRegionIndex = 1, cAudioFormatIndex = 4, InputGain = 0 OutputGain = 0 [PrimeShare] t_SetAudioOutPutGain : eSoundId = 0, Input Gain = 0, Output Gain = 0 [InstallAudioMuteCallback][894] [TPAWindow.cpp][ConnectSource][WID:0][END].. >>[ERR:TDiDemux.cpp] SetInputType():208 Null Fuction Call !!!Must Check Implementation Code... HAL_MVD_LoadCode : From 0x2c4f8bf0 to 0x395c0000, size = 152448 [DevMgr/Fatal] 65 : [GetInstance:43] MutexSafeCreator Success... [DevMgr/Fatal] 66 : [Get:177] Device Manager START... [DevMgr/Fatal] 67 : [t_OnEvent:301] DeviceManager::MESSAGE_FLASH_INFO_UPDATED : DeviceKEY(1), DeviceID(0) [virtual DevicePollingFLASH::~DevicePollingFLASH()] NetworkManager Create NetworkDHCPMonitor::GetInstance() IRQ 11 polling thread destroyed IRQ 11 polling fd closed!! HAL_MVD_LoadCode : From 0x2c4f8bf0 to 0x395c0000, size = 152448 CEManualOSDInfo::Initialize() ~~~~~ Current Pannel horizontal is 1920 [Scaler] TDResolution_k : [21] TDResolutionInfo_t [720], [576], [0], [0], [864], [625], [0], [25000], [1], [0], [0], [0], [0], [0], [0], [0], [513], [1], [0], [17], [0], [0] [BackEnd] TDResolution_k : [21] TDResolutionInfo_t [720], [576], [0], [0], [864], [625], [0], [25000], [1], [0], [0], [0], [0], [0], [0], [0], [513], [1], [0], [17], [0], [0] others SET 50 Hz m_VideoSetting.sScaleData.frameRate = 25000 /etc/network_init.sh dummy start !! [NET_SS/Fatal] 68 : [SetEtherMAC][line:2021] Set MAC eth0 [8c:c8:cd:91:74:14] 8c:c8:cd:91:74:14 [AP_FRONTRUNNER/Fatal] 69 : [t_Create][line:225] Wired Module Loaded... [SSL_library_init] Initializing... APP set Mute Case delay 80msec [SSL_library_init] already intialized... [AP_FRONTRUNNER/Fatal] 70 : [t_Create][line:235] DeviceManager Created... [NET_MW/Fatal] 71 : [GetInstance][line:125] Already created... [AP_NET_SETUP/Fatal] 72 : [void CreateNetworkManager()][line:82] [ StartDeviceMonitoring ] BTHIDProfile : 1RemoteconServiceStatus : 1GlassesServiceStatus : 1BTAVProfile : 0HeadSetServiceStatus : 0iUserOSDFromMsub:6 OPTIONS_Gamma:4, WBMovie_Gamma:6, M_Sub_Gamma:5, M_Sub_Natural_Gamma:3, iGammaOSD:3 SetCondition eCondition = [3] bValue=[1] SetCondition eCondition = [4] bValue=[1] [TPAWindow.cpp][ConnectSource][WID:4][CALL].. Out: Hsize=720, Vsize=576 VE status=8 VE Cap: Hstart=65187, Hsize =720 VE Cap: Vstart=65243, Vsize =576 bootReason not BOOT_REASON_ONTIME!! (-1) CMediaAppUtil::IsMediaSource() false! [DEFAULT/Debugging] 73 : [CMovieDemoAppBase::t_Create - 103] Begin [DEFAULT/Debugging] 74 : [CMovieDemoAppBase::t_Create - 173] End [Scaler] TDResolution_k : [21] TDResolutionInfo_t [720], [576], [0], [0], [864], [625], [0], [25000], [1], [0], [0], [0], [0], [0], [0], [0], [513], [1], [0], [17], [0], [0] >>[X4Share] t_GetExtInSourceToPort: Error Source To Port Set Control Error eSource = 0x201, Port = 6 !!!!!!!!!!!!!!!!!!!!! Source : 513 Window Type : 4 Back End Decoder Type : 7, tdRet=0 >>[ERR:TDsPrimeAudioProcessor.cpp] Connect():1227 - SDAL ERROR [-2] !!! [TPAWindow.cpp][ConnectSource][WID:4][END].. [Scaler] TDResolution_k : [21] TDResolutionInfo_t [720], [576], [0], [0], [864], [625], [0], [25000], [1], [0], [0], [0], [0], [0], [0], [0], [513], [1], [0], [17], [0], [0] [PSA] [CheckPlayreadyKey:356] PlayReady Key (in SS) is already exist. [SSL_library_init] already intialized... [NET_MW/Fatal] 75 : [GetNetworkInfo][line:330] file path = /mtd_rwarea/network_Wired_info not found. Initialize the info file.... [NET_MW/Fatal] 76 : [GetDNSMode][line:863] file path = /mtd_rwarea/network_Wired_info not found. Initialize the info file.... NetworkDHCPMonitor::GetInstance() Already created... => Auto : ifconfig eth0 up >>[ERR:TDiSystem.cpp] SetNetworkInitialized():960 Null Fuction Call !!!Must Check Implementation Code... [TDsPrimeScaler::SetMute]m_eWindowId[0] Mute On. 10ms [13090] IRQ 11 polling thread destroyed IRQ 11 polling fd closed!! eAudDecId(0), eStreamType(0), AudType(0) [TV mode] eAudFormat (0) eAudDecId(1), eStreamType(0), AudType(0) HAL_MVD_LoadCode : From 0x2c4f8bf0 to 0x395c0000, size = 152448 [Scaler] TDResolution_k : [21] TDResolutionInfo_t [720], [576], [0], [0], [864], [625], [0], [50000], [1], [0], [0], [0], [0], [0], [0], [0], [513], [1], [0], [17], [0], [0] [BackEnd] TDResolution_k : [21] TDResolutionInfo_t [720], [576], [0], [0], [864], [625], [0], [50000], [1], [0], [0], [0], [0], [0], [0], [0], [513], [1], [0], [17], [0], [0] iUserOSDFromMsub:6 OPTIONS_Gamma:4, WBMovie_Gamma:6, M_Sub_Gamma:5, M_Sub_Natural_Gamma:3, iGammaOSD:3 SetCondition eCondition = [3] bValue=[1] SetCondition eCondition = [4] bValue=[1] [Scaler] TDResolution_k : [21] TDResolutionInfo_t [720], [576], [0], [0], [864], [625], [0], [50000], [1], [0], [0], [0], [0], [0], [0], [0], [513], [1], [0], [17], [0], [0] address:2b13e000 80000 address:2aebe000 280000 >Load Code... OGA T9 DVB-T Load DSP Code OK @@Enter DVB-T DEMOD_ENTRY @@Exit DVB-T DEMOD_ENTRY ***** Abnormal Demodulator Operation. Restart !!! [DEFAULT/Warning] 77 : Specified confliction type has already been set !! UPnP_ERR:: DLNA: DLNA UPnP_CD_RegisterCallback(dmr/SamsungMRDesc.xml) --> handle [0] bool checkFilesState(const char*) XML files are good UPnP_ERR:: DLNA: DLNA UPnP_CD_RegisterCallback(rcr/RemoteControlReceiver.xml) --> handle [1] Mutex Create Successful Mutex Create Successful [AP_FRONTRUNNER/Fatal] 78 : [t_OnEvent][line:345] MESSAGE_APP_INITIALIZED received [DevMgr/Fatal] 79 : [ExecuteCommand:475] COMMAND_LOAD_USB_MODULES... [DevMgr/Fatal] 80 : [Get:43] DeadlockProber Success... [LoadUSBModules:1117] Start... [AP_SWU/Fatal] 81 : [IsDualBSP][line:1445] This is Single BSP!!!!!!!!!!!!!!!!!! insmod usbcore... success file read - Length(80) [AP_SWU/Fatal] 82 : [m_Check_VirtualPartition][line:8018] Single User Upgrade insmod ehci_hcd... insmod: can't insert '/lib/modules/ohci-hcd.ko': unknown symbol in module, or unknown parameter insmod ohci_hcd... insmod usb_storage... USB : Exit Load USB module... Elapsed Time:760msec. [DevMgr/Fatal] 83 : [ExecuteCommand:502] Case(4) Done... Elapsed Time:760msec. [AP_FRONTRUNNER/Fatal] 84 : [t_OnEvent][line:355] USB Module Loaded... [DevMgr/Fatal] 85 : [ExecuteCommand:442] COMMAND_START_MONITORING... usb_storage found... ehci_hcd found... usbcore found... UPnP_ERR::[dlna at 1] addinfo@[] cpSendMSearch with no ipaddr, currently ignore this [DevMgr/Fatal] 86 : [t_OnEvent:301] DeviceManager::MESSAGE_FLASH_INFO_UPDATED : DeviceKEY(1), DeviceID(0) [DevMgr/Fatal] 87 : [t_OnEvent:231] DeviceManager::MESSAGE_USB_INSMOD_COMPLETE : (11) [AP_BT_APP/Fatal] 88 : [virtual bool CBluetoothAppBase::t_OnEvent(const PTEvent*)][line:1273] [CBluetoothAppBase]MESSAGE_USB_INSMOD_COMPLETE [BT_SS/Fatal] 89 : [LoadBluetoothModule][line:114] [BluetoothUtility] /sbin/insmod /mtd_cmmlib/BT_LIB/btusb.ko [DEFAULT/Debugging] 90 : [CUSBApp::t_OnEvent - 304] [DEFAULT/Debugging] 91 : [CUSBApp::t_OnEvent - 304] [DEFAULT/Debugging] 92 : [CUSBApp::t_OnEvent - 304] [DEFAULT/Debugging] 93 : [CUSBApp::t_OnEvent - 304] [DEFAULT/Debugging] 94 : [CUSBApp::t_OnEvent - 304] [DEFAULT/Debugging] 95 : [CUSBApp::t_OnEvent - 304] [DEFAULT/Debugging] 96 : [CUSBApp::t_OnEvent - 304] [DEFAULT/Debugging] 97 : [CUSBApp::t_OnEvent - 304] [DEFAULT/Debugging] 98 : [CUSBApp::t_OnEvent - 304] [DEFAULT/Debugging] 99 : [CUSBApp::t_OnEvent - 304] [DEFAULT/Debugging] 100 : [CUSBApp::t_OnEvent - 304] [DEFAULT/Debugging] 101 : [CUSBApp::t_OnEvent - 304] [DEFAULT/Debugging] 102 : [CUSBApp::t_OnEvent - 304] [DEFAULT/Debugging] 103 : [CUSBApp::t_OnEvent - 304] [DEFAULT/Debugging] 104 : [CUSBApp::t_OnEvent - 304] [DEFAULT/Debugging] 105 : [CUSBApp::t_OnEvent - 304] [DEFAULT/Debugging] 106 : [CUSBApp::t_OnEvent - 304] [DEFAULT/Debugging] 107 : [CUSBApp::t_OnEvent - 304] UPnP_ERR::[dlna at 2] addinfo@[] cpSendMSearch with no ipaddr, currently ignore this UPnP_ERR::[dlna at 2] addinfo@[] cpSendMSearch with no ipaddr, currently ignore this [DevMgr/Fatal] 108 : [InitiateAllDevices:722] All devices are initiated!!! [DevMgr/Fatal] 109 : [ExecuteCommand:502] Case(2) Done... Elapsed Time:280msec. [AP_FRONTRUNNER/Fatal] 110 : [t_OnEvent][line:373] StartMonitoring Done... [NET_SS/Fatal] 111 : [LoadWirelessStaModule][line:2827] NETWORK TYPE : NETWORK_SUPPORT_WIFI_EXT [NET_SS/Fatal] 112 : [LoadWirelessStaModule][line:2845] WIFI MODULE - EXT TYPE (RALINK STA) [NET_SS/Fatal] 113 : [LoadWirelessStaModule][line:2908] insmod rtutil3572sta.ko ... [BT_MW/Fatal] 114 : [LoadBluetoothModule][line:373] OK!!! [NET_SS/Fatal] 115 : [LoadWirelessStaModule][line:2910] insmod rtutil3572sta.ko ... - Done !! [NET_SS/Fatal] 116 : [LoadWirelessStaModule][line:2918] insmod rt3572sta.ko ... [NET_SS/Fatal] 117 : [LoadWirelessStaModule][line:2920] insmod rt3572sta.ko ... - Done !! [NET_SS/Fatal] 118 : [LoadWirelessStaModule][line:2928] insmod rtnet3572sta.ko ... [NET_SS/Fatal] 119 : [LoadWirelessStaModule][line:2930] insmod rtnet3572sta.ko ... - Done !! [CIP_KERNEL] Success!! Authuld is successfully completed. Fail to open file! - Read fileFail to read ddata success file read - Length(80) [AP_INFOLINK/Fatal] 120 : Call START BG Mode!!! m_fVFMode = 0 [AP_INFOLINK/Fatal] 121 : GetCurrentFC Return True [AP_INFOLINK/Fatal] 122 : GetCurrentFC LineValue is = [0] [AP_INFOLINK/Fatal] 123 : START BG Mode!!! [SSL_library_init] already intialized... [AP_INFOLINK/Fatal] 124 : CInfoLink2WrapperReal::dlopenWrapper() [AP_INFOLINK/Fatal] 125 : filename is = [libSefBroker.so] [AP_INFOLINK/Fatal] 126 : END CInfoLink2WrapperReal::dlopenWrapper() SEF - debug: lsmod Tainted: P rtnet3572sta 97632 0 - Live 0xe0735000 rt3572sta 605648 1 rtnet3572sta, Live 0xe0673000 (P) rtutil3572sta 17952 2 rtnet3572sta,rt3572sta, Live 0xe0582000 btusb 52976 0 - Live 0xe0564000 usb_storage 34896 0 - Live 0xe04b6000 ehci_hcd 47456 0 - Live 0xe048d000 usbcore 125280 6 rtnet3572sta,rtutil3572sta,btusb,usb_storage,ehci_hcd, Live 0xe0454000 mdrv_emac 13696 0 - Live 0xe0410000 samsung_mstar 58448 0 - Live 0xe03da000 rfs_fat 264368 5 - Live 0xe02b6000 (P) rfs_glue 75200 1 rfs_fat, Live 0xe0165000 (P) fsr_stl 241856 8 - Live 0xe01ea000 (P) fsr 410080 1 fsr_stl, Live 0xe00f8000 (P) SEF - debug: ifconfig eth0 Link encap:Ethernet HWaddr 8C:C8:CD:91:74:14 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:30 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:17 Base address:0x4000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) SEF - debug: ai_family[2] ai_socktype[2] ai_protocol[6] SEF - sef_BrokerTestSocket OK [CSEFDebug::Create(16)] Creator called. [CSEFDebug::SetLogLevel(31)] level = 0 [CSEFDebug::SetDebugModule(46)] Log module = 0, onOff = 0 [CSEFDebug::SetDebugModule(46)] Log module = 1, onOff = 0 [CSEFDebug::SetDebugModule(46)] Log module = 2, onOff = 0 [AP_INFOLINK/Fatal] 127 : Update is False [AP_INFOLINK/Fatal] 128 : ***************************************************** [AP_INFOLINK/Fatal] 129 : **** Infomation for connecting with hub-site **** [AP_INFOLINK/Fatal] 130 : ***************************************************** [AP_INFOLINK/Fatal] 131 : Server Type : Operating [AP_INFOLINK/Fatal] 132 : TVID : 2DCN4UQJ635HM [AP_INFOLINK/Fatal] 133 : Mac Address : 8cc8cd917414 [AP_INFOLINK/Fatal] 134 : Firmware : T-INFOLINK2011-1013 [AP_INFOLINK/Fatal] 135 : Country Code : [AP_INFOLINK/Fatal] 136 : Model Code : X6 [AP_INFOLINK/Fatal] 137 : ***************************************************** [AP_INFOLINK/Fatal] 138 : Update is True [AP_INFOLINK/Fatal] 139 : Verify Path = [/mtd_down/widgets/manager/10110000001] [WPS]: HW protection verified = 1 [AP_INFOLINK/Fatal] 140 : CNNaviAppBase::SaveUnsafeMode() [AP_INFOLINK/Fatal] 141 : Create Widget Manager ID => 10110000001 (DbgMaple) [AP_BROWSER/Fatal] 142 : [FATAL] /home3/taitty.kim/X6/AP/Product2011/X6/DEU/AP_Mstar_X6_DEU_Prj/REL/AP_Browser/Maple2011/src/ae/aeWidgetEngine.cpp:901 in createSmartSideBarByWidgetInfo() (DbgMaple) [AP_BROWSER/Fatal] 143 : Enter createSmartSideBar (id : 10110000001) (DbgMaple) [AP_BROWSER/Fatal] 144 : [FATAL] /home3/taitty.kim/X6/AP/Product2011/X6/DEU/AP_Mstar_X6_DEU_Prj/REL/AP_Browser/Maple2011/src/core/am/amWidget.cpp:50 in onTaskCreate() (DbgMaple) [AP_BROWSER/Fatal] 145 : Enter CWidget::onTaskCreate (widget : 0x59e126f0[10110000001], task : 0x59e0c810) (SCREEN NUMBER=1) (DbgMaple) [AP_BROWSER/Fatal] 146 : [FATAL] /home3/taitty.kim/X6/AP/Product2011/X6/DEU/AP_Mstar_X6_DEU_Prj/REL/AP_Browser/Maple2011/src/ae/aeWidgetEngine.cpp:1077 in createSmartSideBarByWidgetInfo() (DbgMaple) [AP_BROWSER/Fatal] 147 : Exit createSmartSideBar (id : 10110000001) [AP_INFOLINK/Fatal] 148 : CWidgetEngine::createSmartSideBar returns TRUE [AP_INFOLINK/Fatal] 149 : Unsafe Mode --> Wait Mode [AP_INFOLINK/Fatal] 150 : Call activateSmartSideBar (DbgMaple) [AP_BROWSER/Fatal] 151 : [FATAL] /home3/taitty.kim/X6/AP/Product2011/X6/DEU/AP_Mstar_X6_DEU_Prj/REL/AP_Browser/Maple2011/src/ae/aeWidgetEngine.cpp:1223 in activateSmartSideBar() (DbgMaple) [AP_BROWSER/Fatal] 152 : Enter activateSmartSideBar (id : 10110000001) (DbgMaple) [AP_BROWSER/Fatal] 153 : [FATAL] /home3/taitty.kim/X6/AP/Product2011/X6/DEU/AP_Mstar_X6_DEU_Prj/REL/AP_Browser/Maple2011/src/core/am/amManagerWidget.cpp:457 in onActivateManagerWidget() (DbgMaple) [AP_BROWSER/Fatal] 154 : onActivateManagerWidget (DbgMaple) [AP_BROWSER/Fatal] 155 : [FATAL] /home3/taitty.kim/X6/AP/Product2011/X6/DEU/AP_Mstar_X6_DEU_Prj/REL/AP_Browser/Maple2011/src/core/pl/plProcess.c:767 in pl_InitStaticPLClass() (DbgMaple) [AP_BROWSER/Fatal] 156 : [Maple Side Plugin] "Camera" plugin is not supported in this application. (DbgMaple) [AP_BROWSER/Fatal] 157 : [FATAL] /home3/taitty.kim/X6/AP/Product2011/X6/DEU/AP_Mstar_X6_DEU_Prj/REL/AP_Browser/Maple2011/src/core/pl/plProcess.c:767 in pl_InitStaticPLClass() (DbgMaple) [AP_BROWSER/Fatal] 158 : [Maple Side Plugin] "Skype" plugin is not supported in this application. (DbgMaple) [AP_BROWSER/Fatal] 159 : [FATAL] /home3/taitty.kim/X6/AP/Product2011/X6/DEU/AP_Mstar_X6_DEU_Prj/REL/AP_Browser/Maple2011/src/core/pl/plProcess.c:767 in pl_InitStaticPLClass() (DbgMaple) [AP_BROWSER/Fatal] 160 : [Maple Side Plugin] "Remote" plugin is not supported in this application. (DbgMaple) [AP_BROWSER/Fatal] 161 : [FATAL] /home3/taitty.kim/X6/AP/Product2011/X6/DEU/AP_Mstar_X6_DEU_Prj/REL/AP_Browser/Maple2011/src/ae/aeWidgetEngine.cpp:1253 in activateSmartSideBar() (DbgMaple) [AP_BROWSER/Fatal] 162 : Exit activateSmartSideBar (id : 10110000001) [AP_INFOLINK/Fatal] 163 : CWidgetEngine::activateSmartSideBar returns TRUE [AP_INFOLINK/Fatal] 164 : Start!!! Waiting Activate Ready Event for Changing Wait Mode => Safe Mode!! [CSocketPorts::GetPort(181)] Port Number: 39318 [CSocketPorts::GetPort(181)] Port Number: 37145 [CSocketPorts::GetPort(181)] Port Number: 54646 [CSocketPorts::GetPort(181)] Port Number: 46505 [EmpMain::EmpMain(59)] <<< EmpMain start >>> [EmpMain::EmpMain(74)] EmpMain nPort = [46505] nLogParam = [-1] [CSEFDebug::SetDebugModule(46)] Log module = 2, onOff = 0 [CheckVersion(45)] CheckVersion(strVersion=[2.000]), (m_strVersion=[1.000]) [gfx_InitPlane:1484] ERROR!!!: Rect Size Bigger than clip support(2126)! (1 x 1936) [SdGfx_HWImageDecode:2411] ERROR!!!: gfx_InitPlane() Plane2FBID: Failed to map Plane. 5a54eae8 [gfx_ReleasePlane] Warining Assert in [gfx_ReleasePlane] Line:1598 [SdGfx_HWImageDecode:2483] ERROR!!!: gfx_ReleasePlane (5a54eae8) Assert in [gfx_ReleasePlane] Line:1598 [SdGfx_HWImageDecode:2489] ERROR!!!: gfx_ReleasePlane (ffffffff) [CSocketPorts::GetPort(181)] Port Number: 40615 [CSocketPorts::GetPort(181)] Port Number: 49299 [CSocketPorts::GetPort(181)] Port Number: 50081 [CSocketPorts::GetPort(181)] Port Number: 46726 [CSocketPorts::GetPort(181)] Port Number: 36765 [CSocketPorts::GetPort(181)] Port Number: 45628 [gfx_InitPlane:1484] ERROR!!!: Rect Size Bigger than clip support(9513)! (1 x 1936) [SdGfx_HWImageDecode:2411] ERROR!!!: gfx_InitPlane() Plane2FBID: Failed to map Plane. 5a54eae8 [gfx_ReleasePlane] Warining Assert in [gfx_ReleasePlane] Line:1598 [SdGfx_HWImageDecode:2483] ERROR!!!: gfx_ReleasePlane (5a54eae8) Assert in [gfx_ReleasePlane] Line:1598 [SdGfx_HWImageDecode:2489] ERROR!!!: gfx_ReleasePlane (ffffffff) [gfx_InitPlane:1484] ERROR!!!: Rect Size Bigger than clip support(5948)! (1 x 1936) [SdGfx_HWImageDecode:2411] ERROR!!!: gfx_InitPlane() Plane2FBID: Failed to map Plane. 5a54eae8 [gfx_ReleasePlane] Warining Assert in [gfx_ReleasePlane] Line:1598 [SdGfx_HWImageDecode:2483] ERROR!!!: gfx_ReleasePlane (5a54eae8) Assert in [gfx_ReleasePlane] Line:1598 [SdGfx_HWImageDecode:2489] ERROR!!!: gfx_ReleasePlane (ffffffff) [gfx_InitPlane:1484] ERROR!!!: Rect Size Bigger than clip support(2275)! (1 x 1936) [SdGfx_HWImageDecode:2411] ERROR!!!: gfx_InitPlane() Plane2FBID: Failed to map Plane. 5a54eae8 [gfx_ReleasePlane] Warining Assert in [gfx_ReleasePlane] Line:1598 [SdGfx_HWImageDecode:2483] ERROR!!!: gfx_ReleasePlane (5a54eae8) Assert in [gfx_ReleasePlane] Line:1598 [SdGfx_HWImageDecode:2489] ERROR!!!: gfx_ReleasePlane (ffffffff) [gfx_InitPlane:1484] ERROR!!!: Rect Size Bigger than clip support(7106)! (1 x 1936) [SdGfx_HWImageDecode:2411] ERROR!!!: gfx_InitPlane() Plane2FBID: Failed to map Plane. 5a54eae8 [gfx_ReleasePlane] Warining Assert in [gfx_ReleasePlane] Line:1598 [SdGfx_HWImageDecode:2483] ERROR!!!: gfx_ReleasePlane (5a54eae8) Assert in [gfx_ReleasePlane] Line:1598 [SdGfx_HWImageDecode:2489] ERROR!!!: gfx_ReleasePlane (ffffffff) [CSocketPorts::GetPort(181)] Port Number: 49155 Singletone emp is running. name:[AppCommon] Emp:[37145] , Client:[49155] , Option:[SINGLETON] , Status:[2][CSocketPorts::GetPort(181)] Port Number: 58587 [CSocketPorts::GetPort(181)] Port Number: 50971 [CSocketPorts::GetPort(181)] Port Number: 58430 [CSocketPorts::GetPort(181)] Port Number: 47265 (DbgAlert) [AP_WIDGET/Fatal] 165 : alert() : [Widget Manager Ver.] 3.288 (DbgAlert) [AP_WIDGET/Fatal] 166 : alert() : [Browser Ver.] 6.0.00067(Windows; U; en-US; rv:1.8.1.11; Gecko/20071129; Firefox/2.5.0) Task GetSystemVersion : [0] (DbgAlert) [AP_WIDGET/Fatal] 167 : alert() : [LEEUM Ver.] DTP-BP-0617-33 Task GetSystemVersion : [1] (DbgAlert) [AP_WIDGET/Fatal] 168 : alert() : [COMP Ver.] DTP-AP-COMP-633-X6_DEU-53 GetServerType in plNNavi_pscomm.cpp . line 287 [CSocketPorts::GetPort(181)] Port Number: 54614 [CSocketPorts::GetPort(181)] Port Number: 36528 (DbgMaple) [AP_BROWSER/Fatal] 169 : [FATAL] /home3/taitty.kim/X6/AP/Product2011/X6/DEU/AP_Mstar_X6_DEU_Prj/REL/AP_Browser/Maple2011/src/core/am/amManagerWidget.cpp:457 in onActivateManagerWidget() (DbgMaple) [AP_BROWSER/Fatal] 170 : onActivateManagerWidget (DbgAlert) [AP_WIDGET/Fatal] 171 : alert() : ########## Activate ########## [gfx_InitPlane:1484] ERROR!!!: Rect Size Bigger than clip support(36901)! (1 x 1936) [SdGfx_HWImageDecode:2411] ERROR!!!: gfx_InitPlane() Plane2FBID: Failed to map Plane. 5a54ea20 [gfx_ReleasePlane] Warining Assert in [gfx_ReleasePlane] Line:1598 [SdGfx_HWImageDecode:2483] ERROR!!!: gfx_ReleasePlane (5a54ea20) Assert in [gfx_ReleasePlane] Line:1598 [SdGfx_HWImageDecode:2489] ERROR!!!: gfx_ReleasePlane (ffffffff) [gfx_InitPlane:1484] ERROR!!!: Rect Size Bigger than clip support(2441)! (1 x 1936) [SdGfx_HWImageDecode:2411] ERROR!!!: gfx_InitPlane() Plane2FBID: Failed to map Plane. 5a54ea20 [gfx_ReleasePlane] Warining Assert in [gfx_ReleasePlane] Line:1598 [SdGfx_HWImageDecode:2483] ERROR!!!: gfx_ReleasePlane (5a54ea20) Assert in [gfx_ReleasePlane] Line:1598 [SdGfx_HWImageDecode:2489] ERROR!!!: gfx_ReleasePlane (ffffffff) [gfx_InitPlane:1484] ERROR!!!: Rect Size Bigger than clip support(2311)! (1 x 1936) [SdGfx_HWImageDecode:2411] ERROR!!!: gfx_InitPlane() Plane2FBID: Failed to map Plane. 5a54ea20 [gfx_ReleasePlane] Warining Assert in [gfx_ReleasePlane] Line:1598 [SdGfx_HWImageDecode:2483] ERROR!!!: gfx_ReleasePlane (5a54ea20) Assert in [gfx_ReleasePlane] Line:1598 [SdGfx_HWImageDecode:2489] ERROR!!!: gfx_ReleasePlane (ffffffff) [gfx_InitPlane:1484] ERROR!!!: Rect Size Bigger than clip support(12294)! (1 x 1936) [SdGfx_HWImageDecode:2411] ERROR!!!: gfx_InitPlane() Plane2FBID: Failed to map Plane. 5a54ea20 [gfx_ReleasePlane] Warining Assert in [gfx_ReleasePlane] Line:1598 [SdGfx_HWImageDecode:2483] ERROR!!!: gfx_ReleasePlane (5a54ea20) Assert in [gfx_ReleasePlane] Line:1598 [SdGfx_HWImageDecode:2489] ERROR!!!: gfx_ReleasePlane (ffffffff) [gfx_InitPlane:1484] ERROR!!!: Rect Size Bigger than clip support(14973)! (1 x 1936) [SdGfx_HWImageDecode:2411] ERROR!!!: gfx_InitPlane() Plane2FBID: Failed to map Plane. 5a54ea20 [gfx_ReleasePlane] Warining Assert in [gfx_ReleasePlane] Line:1598 [SdGfx_HWImageDecode:2483] ERROR!!!: gfx_ReleasePlane (5a54ea20) Assert in [gfx_ReleasePlane] Line:1598 [SdGfx_HWImageDecode:2489] ERROR!!!: gfx_ReleasePlane (ffffffff) [gfx_InitPlane:1484] ERROR!!!: Rect Size Bigger than clip support(14831)! (1 x 1936) [SdGfx_HWImageDecode:2411] ERROR!!!: gfx_InitPlane() Plane2FBID: Failed to map Plane. 5a54ea20 [gfx_ReleasePlane] Warining Assert in [gfx_ReleasePlane] Line:1598 [SdGfx_HWImageDecode:2483] ERROR!!!: gfx_ReleasePlane (5a54ea20) Assert in [gfx_ReleasePlane] Line:1598 [SdGfx_HWImageDecode:2489] ERROR!!!: gfx_ReleasePlane (ffffffff) [gfx_InitPlane:1484] ERROR!!!: Rect Size Bigger than clip support(13486)! (1 x 1936) [SdGfx_HWImageDecode:2411] ERROR!!!: gfx_InitPlane() Plane2FBID: Failed to map Plane. 5a54ea20 [gfx_ReleasePlane] Warining Assert in [gfx_ReleasePlane] Line:1598 [SdGfx_HWImageDecode:2483] ERROR!!!: gfx_ReleasePlane (5a54ea20) Assert in [gfx_ReleasePlane] Line:1598 [SdGfx_HWImageDecode:2489] ERROR!!!: gfx_ReleasePlane (ffffffff) [gfx_InitPlane:1484] ERROR!!!: Rect Size Bigger than clip support(17255)! (1 x 1936) [SdGfx_HWImageDecode:2411] ERROR!!!: gfx_InitPlane() Plane2FBID: Failed to map Plane. 5a54ea20 [gfx_ReleasePlane] Warining Assert in [gfx_ReleasePlane] Line:1598 [SdGfx_HWImageDecode:2483] ERROR!!!: gfx_ReleasePlane (5a54ea20) Assert in [gfx_ReleasePlane] Line:1598 [SdGfx_HWImageDecode:2489] ERROR!!!: gfx_ReleasePlane (ffffffff) [gfx_InitPlane:1484] ERROR!!!: Rect Size Bigger than clip support(14372)! (1 x 1936) [SdGfx_HWImageDecode:2411] ERROR!!!: gfx_InitPlane() Plane2FBID: Failed to map Plane. 5a54ea20 [gfx_ReleasePlane] Warining Assert in [gfx_ReleasePlane] Line:1598 [SdGfx_HWImageDecode:2483] ERROR!!!: gfx_ReleasePlane (5a54ea20) Assert in [gfx_ReleasePlane] Line:1598 [SdGfx_HWImageDecode:2489] ERROR!!!: gfx_ReleasePlane (ffffffff) [gfx_InitPlane:1484] ERROR!!!: Rect Size Bigger than clip support(13474)! (1 x 1936) [SdGfx_HWImageDecode:2411] ERROR!!!: gfx_InitPlane() Plane2FBID: Failed to map Plane. 5a54ea20 [gfx_ReleasePlane] Warining Assert in [gfx_ReleasePlane] Line:1598 [SdGfx_HWImageDecode:2483] ERROR!!!: gfx_ReleasePlane (5a54ea20) Assert in [gfx_ReleasePlane] Line:1598 [SdGfx_HWImageDecode:2489] ERROR!!!: gfx_ReleasePlane (ffffffff) [gfx_InitPlane:1484] ERROR!!!: Rect Size Bigger than clip support(19742)! (1 x 1936) [SdGfx_HWImageDecode:2411] ERROR!!!: gfx_InitPlane() Plane2FBID: Failed to map Plane. 5a54ea20 [gfx_ReleasePlane] Warining Assert in [gfx_ReleasePlane] Line:1598 [SdGfx_HWImageDecode:2483] ERROR!!!: gfx_ReleasePlane (5a54ea20) Assert in [gfx_ReleasePlane] Line:1598 [SdGfx_HWImageDecode:2489] ERROR!!!: gfx_ReleasePlane (ffffffff) [gfx_InitPlane:1484] ERROR!!!: Rect Size Bigger than clip support(17204)! (1 x 1936) [SdGfx_HWImageDecode:2411] ERROR!!!: gfx_InitPlane() Plane2FBID: Failed to map Plane. 5a54ea20 [gfx_ReleasePlane] Warining Assert in [gfx_ReleasePlane] Line:1598 [SdGfx_HWImageDecode:2483] ERROR!!!: gfx_ReleasePlane (5a54ea20) Assert in [gfx_ReleasePlane] Line:1598 [SdGfx_HWImageDecode:2489] ERROR!!!: gfx_ReleasePlane (ffffffff) [gfx_InitPlane:1484] ERROR!!!: Rect Size Bigger than clip support(2744)! (1 x 1936) [SdGfx_HWImageDecode:2411] ERROR!!!: gfx_InitPlane() Plane2FBID: Failed to map Plane. 5a54ea20 [gfx_ReleasePlane] Warining Assert in [gfx_ReleasePlane] Line:1598 [SdGfx_HWImageDecode:2483] ERROR!!!: gfx_ReleasePlane (5a54ea20) Assert in [gfx_ReleasePlane] Line:1598 [SdGfx_HWImageDecode:2489] ERROR!!!: gfx_ReleasePlane (ffffffff) [gfx_InitPlane:1484] ERROR!!!: Rect Size Bigger than clip support(2291)! (1 x 1936) [SdGfx_HWImageDecode:2411] ERROR!!!: gfx_InitPlane() Plane2FBID: Failed to map Plane. 5a54eae8 [gfx_ReleasePlane] Warining Assert in [gfx_ReleasePlane] Line:1598 [SdGfx_HWImageDecode:2483] ERROR!!!: gfx_ReleasePlane (5a54eae8) Assert in [gfx_ReleasePlane] Line:1598 [SdGfx_HWImageDecode:2489] ERROR!!!: gfx_ReleasePlane (ffffffff) [gfx_InitPlane:1484] ERROR!!!: Rect Size Bigger than clip support(2783)! (1 x 1936) [SdGfx_HWImageDecode:2411] ERROR!!!: gfx_InitPlane() Plane2FBID: Failed to map Plane. 5a54eae8 [gfx_ReleasePlane] Warining Assert in [gfx_ReleasePlane] Line:1598 [SdGfx_HWImageDecode:2483] ERROR!!!: gfx_ReleasePlane (5a54eae8) Assert in [gfx_ReleasePlane] Line:1598 [SdGfx_HWImageDecode:2489] ERROR!!!: gfx_ReleasePlane (ffffffff) [gfx_InitPlane:1484] ERROR!!!: Rect Size Bigger than clip support(2722)! (1 x 1936) [SdGfx_HWImageDecode:2411] ERROR!!!: gfx_InitPlane() Plane2FBID: Failed to map Plane. 5a54eae8 [gfx_ReleasePlane] Warining Assert in [gfx_ReleasePlane] Line:1598 [SdGfx_HWImageDecode:2483] ERROR!!!: gfx_ReleasePlane (5a54eae8) Assert in [gfx_ReleasePlane] Line:1598 [SdGfx_HWImageDecode:2489] ERROR!!!: gfx_ReleasePlane (ffffffff) [t9wrapper::InitIME(1144)]InitIME called [t9wrapper::SetLanguage(1299)]pLanguage is [69] [t9wrapper::ImportUDBData(954)]Error: no UDB file is on your device for import operation [t9wrapper::SetLanguage(1299)]pLanguage is [69] [AP_INFOLINK/Fatal] 172 : Setting m_SafeAlarm->Reset(TIME_OUT_STOP, 0); [AP_INFOLINK/Fatal] 173 : Wait Mode --> Safe Mode [AP_INFOLINK/Fatal] 174 : ### MESSAGE_WEBSVC_ACTIVATE_READY_WM ###, m_bFirstStart [1] [AP_INFOLINK/Fatal] 175 : m_CountryCode [] [gfx_InitPlane:1484] ERROR!!!: Rect Size Bigger than clip support(4718)! (1 x 1936) [SdGfx_HWImageDecode:2411] ERROR!!!: gfx_InitPlane() Plane2FBID: Failed to map Plane. 5a54eae8 [gfx_ReleasePlane] Warining Assert in [gfx_ReleasePlane] Line:1598 [SdGfx_HWImageDecode:2483] ERROR!!!: gfx_ReleasePlane (5a54eae8) Assert in [gfx_ReleasePlane] Line:1598 [SdGfx_HWImageDecode:2489] ERROR!!!: gfx_ReleasePlane (ffffffff) [gfx_InitPlane:1484] ERROR!!!: Rect Size Bigger than clip support(6685)! (1 x 1936) [SdGfx_HWImageDecode:2411] ERROR!!!: gfx_InitPlane() Plane2FBID: Failed to map Plane. 5a54eae8 [gfx_ReleasePlane] Warining Assert in [gfx_ReleasePlane] Line:1598 [SdGfx_HWImageDecode:2483] ERROR!!!: gfx_ReleasePlane (5a54eae8) Assert in [gfx_ReleasePlane] Line:1598 [SdGfx_HWImageDecode:2489] ERROR!!!: gfx_ReleasePlane (ffffffff) [gfx_InitPlane:1484] ERROR!!!: Rect Size Bigger than clip support(7543)! (1 x 1936) [SdGfx_HWImageDecode:2411] ERROR!!!: gfx_InitPlane() Plane2FBID: Failed to map Plane. 5a54eae8 [gfx_ReleasePlane] Warining Assert in [gfx_ReleasePlane] Line:1598 [SdGfx_HWImageDecode:2483] ERROR!!!: gfx_ReleasePlane (5a54eae8) Assert in [gfx_ReleasePlane] Line:1598 [SdGfx_HWImageDecode:2489] ERROR!!!: gfx_ReleasePlane (ffffffff) [gfx_InitPlane:1484] ERROR!!!: Rect Size Bigger than clip support(4892)! (1 x 1936) [SdGfx_HWImageDecode:2411] ERROR!!!: gfx_InitPlane() Plane2FBID: Failed to map Plane. 5a54eae8 [gfx_ReleasePlane] Warining Assert in [gfx_ReleasePlane] Line:1598 [SdGfx_HWImageDecode:2483] ERROR!!!: gfx_ReleasePlane (5a54eae8) Assert in [gfx_ReleasePlane] Line:1598 [SdGfx_HWImageDecode:2489] ERROR!!!: gfx_ReleasePlane (ffffffff) [gfx_InitPlane:1484] ERROR!!!: Rect Size Bigger than clip support(6807)! (1 x 1936) [SdGfx_HWImageDecode:2411] ERROR!!!: gfx_InitPlane() Plane2FBID: Failed to map Plane. 5a54eae8 [gfx_ReleasePlane] Warining Assert in [gfx_ReleasePlane] Line:1598 [SdGfx_HWImageDecode:2483] ERROR!!!: gfx_ReleasePlane (5a54eae8) Assert in [gfx_ReleasePlane] Line:1598 [SdGfx_HWImageDecode:2489] ERROR!!!: gfx_ReleasePlane (ffffffff) [gfx_InitPlane:1484] ERROR!!!: Rect Size Bigger than clip support(6928)! (1 x 1936) [SdGfx_HWImageDecode:2411] ERROR!!!: gfx_InitPlane() Plane2FBID: Failed to map Plane. 5a54eae8 [gfx_ReleasePlane] Warining Assert in [gfx_ReleasePlane] Line:1598 [SdGfx_HWImageDecode:2483] ERROR!!!: gfx_ReleasePlane (5a54eae8) Assert in [gfx_ReleasePlane] Line:1598 [SdGfx_HWImageDecode:2489] ERROR!!!: gfx_ReleasePlane (ffffffff) [gfx_InitPlane:1484] ERROR!!!: Rect Size Bigger than clip support(4709)! (1 x 1936) [SdGfx_HWImageDecode:2411] ERROR!!!: gfx_InitPlane() Plane2FBID: Failed to map Plane. 5a54eae8 [gfx_ReleasePlane] Warining Assert in [gfx_ReleasePlane] Line:1598 [SdGfx_HWImageDecode:2483] ERROR!!!: gfx_ReleasePlane (5a54eae8) Assert in [gfx_ReleasePlane] Line:1598 [SdGfx_HWImageDecode:2489] ERROR!!!: gfx_ReleasePlane (ffffffff) [gfx_InitPlane:1484] ERROR!!!: Rect Size Bigger than clip support(7564)! (1 x 1936) [SdGfx_HWImageDecode:2411] ERROR!!!: gfx_InitPlane() Plane2FBID: Failed to map Plane. 5a54eae8 [gfx_ReleasePlane] Warining Assert in [gfx_ReleasePlane] Line:1598 [SdGfx_HWImageDecode:2483] ERROR!!!: gfx_ReleasePlane (5a54eae8) Assert in [gfx_ReleasePlane] Line:1598 [SdGfx_HWImageDecode:2489] ERROR!!!: gfx_ReleasePlane (ffffffff) [gfx_InitPlane:1484] ERROR!!!: Rect Size Bigger than clip support(6822)! (1 x 1936) [SdGfx_HWImageDecode:2411] ERROR!!!: gfx_InitPlane() Plane2FBID: Failed to map Plane. 5a54eae8 [gfx_ReleasePlane] Warining Assert in [gfx_ReleasePlane] Line:1598 [SdGfx_HWImageDecode:2483] ERROR!!!: gfx_ReleasePlane (5a54eae8) Assert in [gfx_ReleasePlane] Line:1598 [SdGfx_HWImageDecode:2489] ERROR!!!: gfx_ReleasePlane (ffffffff) [A_APPMW/Fatal] 176 : >>>> Function OSD Type : NOT SUPPORT [DEFAULT/Debugging] 177 : [ProcessPowerOff:632] ExecutePowerOff called(Tick=168400) mode = 0, eOffReason = 3 !! [AP_SWU/Fatal] 178 : [PowerOffEnableCheckCallback][line:6380] USB Upgrade is not Active. Or Not Sleep, Off Timer. [AP_INFOLINK/Fatal] 179 : CNNaviAppBase::PrePowerOff() [AP_INFOLINK/Fatal] 180 : Before m_pEngine->preparePowerOff() [AP_INFOLINK/Fatal] 181 : After m_pEngine->preparePowerOff() [AP_INFOLINK/Fatal] 182 : End CNNaviAppBase::PrePowerOff() [AP_FRONTRUNNER/Fatal] 183 : [t_ProcessPowerOff][line:518] ... [DevMgr/Fatal] 184 : [ExecuteCommand:458] COMMAND_STOP_MONITORING... [DevMgr/Fatal] 185 : [ExecuteCommand:502] Case(3) Done... Elapsed Time:0msec. [AP_FRONTRUNNER/Fatal] 186 : [t_ProcessPowerOff][line:542] StopMonitoring Done... [NET_MW/Fatal] 187 : [GetInstance][line:125] Already created... [AP_BT_APP/Fatal] 188 : [virtual bool CBluetoothAppBase::t_OnEvent(const PTEvent*)][line:730] --------------- [ BluetoothSetup : MESSAGE_POWER_OFF_START ] ------------- [TDsPrimeScaler::SetMute]m_eWindowId[0] Mute On. 10ms [168470] ## [DisableScreen] Screen(0), Caller(2) [PLF][IsEnabled:148] SCREEN0 (true) ## [DisableScreen] Screen(1), Caller(2) [PLF][IsEnabled:148] SCREEN1 (true) [X6_Screen32.cpp:Disable:429] SCREEN1 [SdGfx_Mute:1176-TID(149)] screen(1) On(1)/Off(0) : 0 [PLF][Disable:218] SCREEN1 OK [TDsPrimeScaler::SetMute]m_eWindowId[0] Mute On. 30ms [168520] [ Fast Boot ] [ Panel Control Type : 0 ] |||||||||||||||||| Inverter Off ..!!! |||||||||||||||||| |||||||||||||||||| PWM Disable ..!!! |||||||||||||||||| |||||||||||||||||| LVDS OutPut Off ..!!! |||||||||||||||||| |||||||||||||||||| PVCC Off ..!!! |||||||||||||||||| ## StopAllRunningApps [CallThread=0x47ac64d0] nStopOpti0n(0x0) ## [InstallResourceRequestCallback][811] [168:728259][DEBUG][InstallResourceRequestCallback][812] @@@[SSSO SOURCE_TYPE_DTV1] [SsSourceBase.cpp] ControlAudioClip, ControlType[1] [TPAWindow.cpp][DisconnectSource][WID:4][CALL].. >>[ERR:TDsPrimeAudioProcessor.cpp] Disconnect():1354 - SDAL ERROR [-2] !!! [TPAWindow.cpp][DisconnectSource][WID:4][END].. @@@[SSSO SOURCE_TYPE_DTV1] [SsSourceBase.cpp] ControlAudioClip, ControlType[1] [TPAWindow.cpp][DisconnectSource][WID:0][CALL].. [168:844137][DEBUG][UninstallResolutionCallback][794] [168:844247][DEBUG][UninstallResolutionCallbackForClip][802] [168:844311][DEBUG][UninstallAudioMuteCallback][904] >>[ERR:TDsPrimeDemux.cpp] SetAudioDescriptionId():957 Invalid Audio Descriptio PID... eAudDecId(1), eStreamType(0), AudType(0) [TPAWindow.cpp][DisconnectSource][WID:0][END].. >>[ERR:TDiDemux.cpp] SetInputType():208 Null Fuction Call !!!Must Check Implementation Code... IRQ 11 polling thread destroyed IRQ 11 polling fd closed!! eAudDecId(0), eStreamType(0), AudType(0) [TV mode] eAudFormat (0) [UninstallResourceRequestCallback][822] >>[ERR:TDsPrimeMpeg.cpp] t_UnInstallCBForPVR():2654 - SDAL ERROR [-2] !!! >>[ERR:TDsPrimeMpeg.cpp] t_UnInstallCBForPVR():2654 - SDAL ERROR [-2] !!! >>[ERR:TDsPrimeMpeg.cpp] t_UnInstallCBForPVR():2654 - SDAL ERROR [-2] !!! Initial Value ,No Input Source others Initial Value ,No Input Source Initial Value ,No Input Source [DEFAULT/Fatal] 189 : [SetBootChannel] 37,2 TPCTv::Power, ######## 1 ######## Param : 0 TPCTv::Power, Return Value Check : 1 ####### Header = 31, 0 TPCTv::Power, ######## 0 ######## Param : 1 TPCTv::Power, Return Value Check : 1 >>[ERR:MonThread.cpp] Destroy():93 Aleady Destroy... end of Melody for on [ TurnPowerOffForKeyTest ] Skip Power Reset Process -?- -?- bOnOff : 0 |||||||||||||||||| Store Destroy ..!!! |||||||||||||||||| |||||||||||||||||| Finish Store Destroy ..!!! |||||||||||||||||| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| ||| Send Power Off Command to Micom ..!!! << STANDBY MODE >> ||| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| There's no usb device